Structures & Subassemblies tests

Rail Tests

Home Rail tests Structures & Subassemblies tests

Mechanical testing on structures and subassemblies both with application of maximum break loads or real measured operational loads.

Homologation tests accredited according to international standards as well as specific tests for R&D purposes, design modification and optimization as well as root cause failure analyses.

Carbody Frames

We are a test laboratory accredited to perform carbody structural test according to EN 12663. Our broad experience in this field allows us to provide a complete service with regards to carbody structural verification in our test benches (in CETEST facilities or at your place using our portable test rigs!).

Cetest-Testing of bogie / truck frames and bolsters

Bogie frames and bolsters

Our test laboratory is accredited to accomplish bogie and bolster fatigue test according to EN 13749, UIC 514-4 and UIC 614-4. These tests are also required to achieve TSI homologation for these components.

Couplers and spherical joints

We test couplers according to EN16019 or according to any other specific standard required by the customer. The test are performed to validate and homologate the design and to characterize the full system.

Components Testing

At CETEST we have the expertise and the necessary equipment to test all a broad range of components mounted on a rail vehicle. Functional and fatigue test are defined according to our customers specification.

855 330 3593
cetest@cetestgroup.com

About us

CETEST is a fully accredited independent test laboratory offering services for design verification, model validation, developmental testing and/or answers to help you identify failure root causes. We carry out tests in our facilities as well as on site as required by client needs.

More than a contractor, more than a partner: we want you to feel CETEST as your internal test and evaluation department. Anytime, anywhere.